- Home
- Introduction
- Contract Honing
- Hand Honing
- Tube Polishing
- Tube Honing
- Products
- New Machines
- Used Machines
- Capacity List
- Contact Us
Apperley Honing Limited
Alpha Works, Alstone Lane
Cheltenham GL51 8ES
United Kingdom
Tel: +44 (0) 1242 525868
Fax: +44 (0) 1242 224738
sales@apperleyhoning.co.uk
Used Machines Stock
Apperley Honing hold what is possibly the largest stock of used honing machines in Europe.
Click image for a larger versionBarnes International (USA)Model:
224Capacity:
25 -150mm diameter x600mm longDescription:
Basic vertical hone fitted with hydraulic stone expansion. Price:
Make us an offer -it has to go!Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Let us know what you need Training available from £350/dayEmail:
enquire about this machine
224Capacity:
25 -150mm diameter x600mm longDescription:
Basic vertical hone fitted with hydraulic stone expansion. Price:
Make us an offer -it has to go!Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Let us know what you need Training available from £350/dayEmail:
enquire about this machine
Click image for a larger versionBarnes International (USA)Model:
Number 3Capacity:
Tubes 10 -300mm diameter, up to 4000mm longDescription:
We have four of these extremely popular rugged horizontal hones in stock that range in stroke-length (from 3.0 to 4.0m), age and condition (from virtually unused to one that needs a full rebuild). Ideally suited for tubes between 25 -150mm diameter, they can be adapted to hone down to 10mm and up to 300mm diameter.Price:
POATerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable Training available from £350/dayEmail:
enquire about this machine
Number 3Capacity:
Tubes 10 -300mm diameter, up to 4000mm longDescription:
We have four of these extremely popular rugged horizontal hones in stock that range in stroke-length (from 3.0 to 4.0m), age and condition (from virtually unused to one that needs a full rebuild). Ideally suited for tubes between 25 -150mm diameter, they can be adapted to hone down to 10mm and up to 300mm diameter.Price:
POATerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable Training available from £350/dayEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)Model:
Bench HoneCapacity:
1.50 -80.00mm diameterDescription:
The most basic Delapena. An ideal introductory single phase machine for occasional use. Perfect for glaze breaking cylinders, removing distortion from heat treatment and de-burring small parts. We have two ex-Cosworth Engineering machines in stock, and another mounted on a home-made table complete with honing oil tank and re-circulation pump.Price:
from £600Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Bench HoneCapacity:
1.50 -80.00mm diameterDescription:
The most basic Delapena. An ideal introductory single phase machine for occasional use. Perfect for glaze breaking cylinders, removing distortion from heat treatment and de-burring small parts. We have two ex-Cosworth Engineering machines in stock, and another mounted on a home-made table complete with honing oil tank and re-circulation pump.Price:
from £600Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)Model:
HHM 1ACapacity:
1.5 -80.0mm diameterDescription:
The HHM1A is a basic hand-honing machine, and was the forerunner to Delapena's popular 'Speedhone'. It can do just about everything the more expensive models can, and is the ideal machine for the light user. We have two examples available, both in excellent running order. Price:
£750 & £900Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
HHM 1ACapacity:
1.5 -80.0mm diameterDescription:
The HHM1A is a basic hand-honing machine, and was the forerunner to Delapena's popular 'Speedhone'. It can do just about everything the more expensive models can, and is the ideal machine for the light user. We have two examples available, both in excellent running order. Price:
£750 & £900Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment UKSOLDModel:
SpeedhoneCapacity:
1.5 -80.0mm diameterDescription:
Workhorse of the hand honing world, simple and straightforward. If this machine were an Englishman, it would speak in a Yorkshire accent. It's been fully overhauled, repainted and is ready to give years more service.Price:
£1,500Terms:
Pro-forma, (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
New Delapena tooling available as required.Email:
enquire about this machine
SpeedhoneCapacity:
1.5 -80.0mm diameterDescription:
Workhorse of the hand honing world, simple and straightforward. If this machine were an Englishman, it would speak in a Yorkshire accent. It's been fully overhauled, repainted and is ready to give years more service.Price:
£1,500Terms:
Pro-forma, (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
New Delapena tooling available as required.Email:
enquire about this machine
Click image for a larger versionDelapena Honing EquipmentModel:
SpeedhoneCapacity:
1.50 -80.0mm diameterDescription:
'Every workshop should have one' There's not much that can be said about a Speedhone. It is the most reliable, straightforward, easy to use honing machine ever produced. There must be thousands of them in circulation, and we always have several in stock. Price:
£1,500Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
New Delapena tooling available as required. Training offered from £350/day Email:
enquire about this machine
SpeedhoneCapacity:
1.50 -80.0mm diameterDescription:
'Every workshop should have one' There's not much that can be said about a Speedhone. It is the most reliable, straightforward, easy to use honing machine ever produced. There must be thousands of them in circulation, and we always have several in stock. Price:
£1,500Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
New Delapena tooling available as required. Training offered from £350/day Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)Model:
AutospeedhoneCapacity:
1.50 -80.00mmDescription:
Delapena's Autospeedhone is suitable for automatically honing medium and large batches of components. We usually keep several examples in stock, including both traditional and the latest EA versions. Price:
Several available from £1,500 to £2,900Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
AutospeedhoneCapacity:
1.50 -80.00mmDescription:
Delapena's Autospeedhone is suitable for automatically honing medium and large batches of components. We usually keep several examples in stock, including both traditional and the latest EA versions. Price:
Several available from £1,500 to £2,900Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment UKModel:
SmarthoneCapacity:
1.50 -80.0mm diameterDescription:
The Smarthone is an Autospeedhone fitted with an vibratory pick and place fixture and autosizing control that allows the machine to run automatically, unattended for hour after hour. Designed for volume manufacture, the machine will need to be re-jigged and then set for a new job, and we can help and advise on this if requiredPrice:
TBATerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
TBAEmail:
enquire about this machine
SmarthoneCapacity:
1.50 -80.0mm diameterDescription:
The Smarthone is an Autospeedhone fitted with an vibratory pick and place fixture and autosizing control that allows the machine to run automatically, unattended for hour after hour. Designed for volume manufacture, the machine will need to be re-jigged and then set for a new job, and we can help and advise on this if requiredPrice:
TBATerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
TBAEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)Model:
PowerhoneCapacity:
35.4 -368.00mm diameter, x1000mm strokeDescription:
We currently have two of these versatile and robust machines in stock. The Powerhone is the replacement for the popular Auto-Beamstroker, and it combines hydraulic stroking power with precise control. The machines have short stroke and dwell facilities along with self contained honing oil tanks and pump units. Fitted with the optional honing stone feed control this type of machine would sell new today for over £25,000.Price:
£14,800Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
PowerhoneCapacity:
35.4 -368.00mm diameter, x1000mm strokeDescription:
We currently have two of these versatile and robust machines in stock. The Powerhone is the replacement for the popular Auto-Beamstroker, and it combines hydraulic stroking power with precise control. The machines have short stroke and dwell facilities along with self contained honing oil tanks and pump units. Fitted with the optional honing stone feed control this type of machine would sell new today for over £25,000.Price:
£14,800Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment UKModel:
VHM 3E 66Capacity:
40 -300mm diameter up to 1500mm longDescription:
We have two of these powerful vertical honing machines in stock. Equipped with hydraulic 'push' expansion they are capable of very rapid stock removal and are ideal for honing hydraulic cylinders and chunky machined components. Made in the 1960's these machines have straightforward hydraulic and electrical circuits, which makes them very simple to service and easy to use and operate.Price:
Offers based on £14,750, depending on tooling requiredTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
As required Training offered from £350/day.Email:
enquire about this machine
VHM 3E 66Capacity:
40 -300mm diameter up to 1500mm longDescription:
We have two of these powerful vertical honing machines in stock. Equipped with hydraulic 'push' expansion they are capable of very rapid stock removal and are ideal for honing hydraulic cylinders and chunky machined components. Made in the 1960's these machines have straightforward hydraulic and electrical circuits, which makes them very simple to service and easy to use and operate.Price:
Offers based on £14,750, depending on tooling requiredTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
As required Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionJones & Shipman UKModel:
772Capacity:
Small bore componentsDescription:
It's grey, and I'm afraid we really don't know very much more about this machine that we took in part-exchange a while back. If you're looking for a 772 then you'll know more about one than we do, and if you're not, then you probably won't be interested in what it can do anyway.Price:
Make an offer and pick up a barginTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on your transport ex-works CheltenhamTooling:
Tooling's not included, and training's not available, because we hardly even know how to turn this one on, yet alone run it.Email:
enquire about this machine
772Capacity:
Small bore componentsDescription:
It's grey, and I'm afraid we really don't know very much more about this machine that we took in part-exchange a while back. If you're looking for a 772 then you'll know more about one than we do, and if you're not, then you probably won't be interested in what it can do anyway.Price:
Make an offer and pick up a barginTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on your transport ex-works CheltenhamTooling:
Tooling's not included, and training's not available, because we hardly even know how to turn this one on, yet alone run it.Email:
enquire about this machine
Click image for a larger versionSunnen Products USAModel:
MBB 1600Capacity:
1.5 -80.0mm diameterDescription:
The MBB 1600 is a basic hand honing machine and was for many years Sunnen's introductory machine. Suitable for the occasional user.Price:
£780Terms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
MBB 1600Capacity:
1.5 -80.0mm diameterDescription:
The MBB 1600 is a basic hand honing machine and was for many years Sunnen's introductory machine. Suitable for the occasional user.Price:
£780Terms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products USAModel:
MBB 1660Capacity:
1.5 -80.0mm diameterDescription:
The Sunnen MBB 1660 (and its sister model the MBB 1650) are workhorses of the hand-honing world. Very similar to Delapena'a Speedhone they are simple machines being very easy to set up and run. We have two in stock, both in excellent condition, one of which comes complete with the optional PFN150 grit guard filter.Price:
from £1,480Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
MBB 1660Capacity:
1.5 -80.0mm diameterDescription:
The Sunnen MBB 1660 (and its sister model the MBB 1650) are workhorses of the hand-honing world. Very similar to Delapena'a Speedhone they are simple machines being very easy to set up and run. We have two in stock, both in excellent condition, one of which comes complete with the optional PFN150 grit guard filter.Price:
from £1,480Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products USAModel:
MBB1650 +PFN grit guardCapacity:
1.5 -80.0mmDescription:
The MBB1650 (and its sister model the MBB1660) are workhorses of the hand honing world. Very similar to Delapena's Speedhone they are simple machines to set and run. This example is in great condition and comes complete with the desirable PFN150 grit guard filter.Price:
£2,170Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
MBB1650 +PFN grit guardCapacity:
1.5 -80.0mmDescription:
The MBB1650 (and its sister model the MBB1660) are workhorses of the hand honing world. Very similar to Delapena's Speedhone they are simple machines to set and run. This example is in great condition and comes complete with the desirable PFN150 grit guard filter.Price:
£2,170Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products USAModel:
MBB 1650 +KKN300 attachment & PFN150 filterCapacity:
1.5 -80.0mmDescription:
The Sunnen MBB 1650 (and its sister model the MBB 1660) are workhorses of the hand-honing world. Very similar to Delapena'a Speedhone they are simple machines being very easy to set up and run. This example comes complete with the desirable KKN300 power honing attachment & PFN150 grit guard filter.Price:
£2,480Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
MBB 1650 +KKN300 attachment & PFN150 filterCapacity:
1.5 -80.0mmDescription:
The Sunnen MBB 1650 (and its sister model the MBB 1660) are workhorses of the hand-honing world. Very similar to Delapena'a Speedhone they are simple machines being very easy to set up and run. This example comes complete with the desirable KKN300 power honing attachment & PFN150 grit guard filter.Price:
£2,480Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products USAModel:
MBB 1804Capacity:
1.50 -80.0mm diameterDescription:
Sunnen MBB/MBC 1804 machines are semi-automatic machines that are suitable for running large batches of components. This example is in excellent condition and benefits from the desirable PFN150 grit guard filterPrice:
£5,800Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on lorry, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
MBB 1804Capacity:
1.50 -80.0mm diameterDescription:
Sunnen MBB/MBC 1804 machines are semi-automatic machines that are suitable for running large batches of components. This example is in excellent condition and benefits from the desirable PFN150 grit guard filterPrice:
£5,800Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on lorry, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)Model:
CK10 Cylinder KingCapacity:
19 -203mm diameter, x250mm workpieceDescription:
The CK10 is original 'Daddy' of all Cylinder Kings, and is the easiest to set up and run of the whole family. This version is in excellent condition and is in daily use in our busy sub-contract honing department where it has proven to be rugged and reliable. Price:
£5,800Terms:
Pro-forma, (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable. Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
CK10 Cylinder KingCapacity:
19 -203mm diameter, x250mm workpieceDescription:
The CK10 is original 'Daddy' of all Cylinder Kings, and is the easiest to set up and run of the whole family. This version is in excellent condition and is in daily use in our busy sub-contract honing department where it has proven to be rugged and reliable. Price:
£5,800Terms:
Pro-forma, (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable. Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)Model:
CV616 Cylinder KingCapacity:
19 -203mm diameter x250mm longDescription:
The CV616 is the last of the manual Cylinder Kings. We have three of these in stock, including a 'green' machine from the early 1990's that is in truly excellent order, (having previously been owned by a Formula One motor-racing team) and a newer 'white' machine with the desirable LCD readout that gives an indication of bore ovality and taper. Price:
from £7,500 to £12,700Terms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable Training offered from £350/day.Email:
enquire about this machine
CV616 Cylinder KingCapacity:
19 -203mm diameter x250mm longDescription:
The CV616 is the last of the manual Cylinder Kings. We have three of these in stock, including a 'green' machine from the early 1990's that is in truly excellent order, (having previously been owned by a Formula One motor-racing team) and a newer 'white' machine with the desirable LCD readout that gives an indication of bore ovality and taper. Price:
from £7,500 to £12,700Terms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)Model:
CK 21Capacity:
19 -203mm diameter, workpieces up to 450mm longDescription:
The CK 21 is the third generation of Sunnen's popular Cylinder King range of vertical honing machines. CK21's have programmable controllers which allow the operator to adjust settings directly from his control panel, and whilst in-cycle display a real time graphic of the actual bore size, indicating stock removal, taper and ovality. We only have one of these left now, having brought a whole container load over from the US in January.Price:
£19,700Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Negotiable. Training offered from £350/day.Email:
enquire about this machine
CK 21Capacity:
19 -203mm diameter, workpieces up to 450mm longDescription:
The CK 21 is the third generation of Sunnen's popular Cylinder King range of vertical honing machines. CK21's have programmable controllers which allow the operator to adjust settings directly from his control panel, and whilst in-cycle display a real time graphic of the actual bore size, indicating stock removal, taper and ovality. We only have one of these left now, having brought a whole container load over from the US in January.Price:
£19,700Terms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Negotiable. Training offered from £350/day.Email:
enquire about this machine