- Home
- Introduction
- Contract Honing
- Hand Honing
- Tube Polishing
- Tube Honing
- Products
- Used Machines
- Capacity List
- Contact Us
Apperley Honing Limited
Malmesbury Road
Kingsditch Trading Estate
Cheltenham GL51 9PL
United Kingdom
Tel: +44 (0) 1242 525868
Fax: +44 (0) 1242 224738
sales@apperleyhoning.co.uk
Used Honing Machines
Apperley Honing hold what is probably the largest stock of used honing machines in Europe.
Stock includes manual and automatic stroke hand-honing machines, Beamstrokers, Cylinder Kings, Horizontal & Vertical tube honers, from Delapena, Sunnen and Barnes. Machines can be demonstrated under power in our Cheltenham (UK) workshops, and can be supplied complete with tooling, fixtures, gauges, consumables and full operator training.
Click image for a larger versionDelapena Honing EquipmentSOLDModel:
VHM/18-01Capacity:
25.0 -150mm diameter x460mm longDescription:
The VHM18 is an old school vertical hone suitable for honing automotive cylinder liners and compressor bodies. This machine is in perfect working order and for the price knocks spots of Sunnen's Cylinder King.Price:
SOLDTerms:
Pro-Forma FCA (loaded on your transport ex-works Cheltenham) Tooling:
New and used tooling is available at extra costEmail:
enquire about this machine
VHM/18-01Capacity:
25.0 -150mm diameter x460mm longDescription:
The VHM18 is an old school vertical hone suitable for honing automotive cylinder liners and compressor bodies. This machine is in perfect working order and for the price knocks spots of Sunnen's Cylinder King.Price:
SOLDTerms:
Pro-Forma FCA (loaded on your transport ex-works Cheltenham) Tooling:
New and used tooling is available at extra costEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
E3000Capacity:
3.0 –80.0mm diameter x 300mm stroke Description:
The E3000 is a simple to operate but technically advanced NC controlled vertical hone. It utilises a fully programmable electronic management system, which allows the user to input, store, monitor and control all necessary machine and tooling parameters. Suitable for honing both one-offs and production batches to sub-micron tolerances this second hand honing machine is ideal for the volume user. Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
E3000Capacity:
3.0 –80.0mm diameter x 300mm stroke Description:
The E3000 is a simple to operate but technically advanced NC controlled vertical hone. It utilises a fully programmable electronic management system, which allows the user to input, store, monitor and control all necessary machine and tooling parameters. Suitable for honing both one-offs and production batches to sub-micron tolerances this second hand honing machine is ideal for the volume user. Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Click image for a larger versionDelapenaSOLDModel:
DH90/15Capacity:
1.0" -5.0" diameter x60" long`Description:
The DH90/15 machine is a lightweight horizontal hone ideal for small batch work. It uses hydraulics for the stroking drive and Delapena's famous and reliable friction feed unit to control the hone expansion.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Price includes tooling for all bores 1.0" -5.0" diameterEmail:
enquire about this machine
DH90/15Capacity:
1.0" -5.0" diameter x60" long`Description:
The DH90/15 machine is a lightweight horizontal hone ideal for small batch work. It uses hydraulics for the stroking drive and Delapena's famous and reliable friction feed unit to control the hone expansion.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Price includes tooling for all bores 1.0" -5.0" diameterEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
HHM30/20Capacity:
50 -460mm diameter x9145mm stroke Description:
A huge powerful proper used tube honer. Not to be confused with lightweight alternatives this is a full size production machine with 20hp motors, capable of ripping stock out of even the hardest of materials. Currently owned by our sister company Apperley Honing this machine has proved to be reliable, accurate and strong.Price:
SOLDTerms:
Pro-forma FCA (loaded on your transport ex-works Cheltenham)+VAT for UK sales Tooling:
Tooling available by negotiationEmail:
enquire about this machine
HHM30/20Capacity:
50 -460mm diameter x9145mm stroke Description:
A huge powerful proper used tube honer. Not to be confused with lightweight alternatives this is a full size production machine with 20hp motors, capable of ripping stock out of even the hardest of materials. Currently owned by our sister company Apperley Honing this machine has proved to be reliable, accurate and strong.Price:
SOLDTerms:
Pro-forma FCA (loaded on your transport ex-works Cheltenham)+VAT for UK sales Tooling:
Tooling available by negotiationEmail:
enquire about this machine
Click image for a larger versionJones & Shipman (UK)SOLDModel:
772Capacity:
Small bore componentsDescription:
It's grey, and I'm afraid we really don't know very much more about this machine that we took in part-exchange a while back. If you're looking for a 772 then you'll know more about one than we do, and if you're not, then you probably won't be interested in what it can do anyway.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on your transport ex-works CheltenhamTooling:
Tooling's not included, and training's not available, because we hardly even know how to turn this one on, yet alone run it.Email:
enquire about this machine
772Capacity:
Small bore componentsDescription:
It's grey, and I'm afraid we really don't know very much more about this machine that we took in part-exchange a while back. If you're looking for a 772 then you'll know more about one than we do, and if you're not, then you probably won't be interested in what it can do anyway.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on your transport ex-works CheltenhamTooling:
Tooling's not included, and training's not available, because we hardly even know how to turn this one on, yet alone run it.Email:
enquire about this machine
Click image for a larger versionJones & Shipman SOLDModel:
762 Capacity:
1" to 4.1/2" diameter x15" strokeDescription:
A very clean and tidy J&S 762 machine suitable for volume production of mid-sized components that we're offering for sale on behalf of some friends of ours in Motherwell Scotland.Terms:
Pro-forma. FCA (loaded on your transport, ex-works Motherwell)Tooling:
Machine comes complete with 16-mandrels. Email:
enquire about this machine
762 Capacity:
1" to 4.1/2" diameter x15" strokeDescription:
A very clean and tidy J&S 762 machine suitable for volume production of mid-sized components that we're offering for sale on behalf of some friends of ours in Motherwell Scotland.Terms:
Pro-forma. FCA (loaded on your transport, ex-works Motherwell)Tooling:
Machine comes complete with 16-mandrels. Email:
enquire about this machine
Click image for a larger versionNagel (Germany)SOLDModel:
VA2-120-SOCapacity:
50.0 -250.0mm diameter up to 1000mm longDescription:
A powerful 3kW hydraulic used vertical hone that takes no prisoners. It can run either Sunnen 'Portable' or Delapena 'Cylinder' tooling with a friction feed expansion unit. Great machine for one off and production honingPrice:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Delapena or Sunnen tooling available at extra costEmail:
enquire about this machine
VA2-120-SOCapacity:
50.0 -250.0mm diameter up to 1000mm longDescription:
A powerful 3kW hydraulic used vertical hone that takes no prisoners. It can run either Sunnen 'Portable' or Delapena 'Cylinder' tooling with a friction feed expansion unit. Great machine for one off and production honingPrice:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Delapena or Sunnen tooling available at extra costEmail:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
MBB 1600Capacity:
1.5 -80.0mm diameterDescription:
The MBB 1600 is a basic hand honing machine and was for many years Sunnen's introductory machine. Suitable for the occasional user.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
MBB 1600Capacity:
1.5 -80.0mm diameterDescription:
The MBB 1600 is a basic hand honing machine and was for many years Sunnen's introductory machine. Suitable for the occasional user.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
MBB 1650 +KKN300 attachment & PFN150 filterCapacity:
1.5 -80.0mmDescription:
The Sunnen MBB 1650 (and its sister model the MBB 1660) are workhorses of the hand-honing world. Very similar to Delapena'a Speedhone they are simple machines being very easy to set up and run. This example comes complete with the desirable KKN300 power honing attachment & PFN150 grit guard filter.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
MBB 1650 +KKN300 attachment & PFN150 filterCapacity:
1.5 -80.0mmDescription:
The Sunnen MBB 1650 (and its sister model the MBB 1660) are workhorses of the hand-honing world. Very similar to Delapena'a Speedhone they are simple machines being very easy to set up and run. This example comes complete with the desirable KKN300 power honing attachment & PFN150 grit guard filter.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
MBB1660Capacity:
1.5 -80.0mm diameterDescription:
We've just aquired two late model MBB1660 machines. Both white, one with red stripes and one with black stripes. They are both in excellent condition and come complete with the PF150 grit guard filters. They are sure to sell soon, so phone now to register interestPrice:
SOLDTerms:
Pro-forma. FCA (loaded on your transport, ex-works Cheltenham) Tooling:
New and used tooling is available at additional costEmail:
enquire about this machine
MBB1660Capacity:
1.5 -80.0mm diameterDescription:
We've just aquired two late model MBB1660 machines. Both white, one with red stripes and one with black stripes. They are both in excellent condition and come complete with the PF150 grit guard filters. They are sure to sell soon, so phone now to register interestPrice:
SOLDTerms:
Pro-forma. FCA (loaded on your transport, ex-works Cheltenham) Tooling:
New and used tooling is available at additional costEmail:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
MBC 1804Capacity:
3.15 -51.00mm, up to 250mm longDescription:
The MBC1804 was Sunnen's top of the range honer in late 80's and early 90's and we have a good clean example in stock. Up until recently we were using it in our contract honing department to produce 30,000 parts per week for an automotive contract, and so we know that it is a good solid reliable machines.Price:
SOLDTerms:
Pro-forma, (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
MBC 1804Capacity:
3.15 -51.00mm, up to 250mm longDescription:
The MBC1804 was Sunnen's top of the range honer in late 80's and early 90's and we have a good clean example in stock. Up until recently we were using it in our contract honing department to produce 30,000 parts per week for an automotive contract, and so we know that it is a good solid reliable machines.Price:
SOLDTerms:
Pro-forma, (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
LBB 1810Capacity:
Up to 80.0mm diameterDescription:
Sunnen 1810 series machines are designed for the semi-automatic honing of con-rods, but they are suitable for all sorts of similar shaped bores Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on lorry, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
LBB 1810Capacity:
Up to 80.0mm diameterDescription:
Sunnen 1810 series machines are designed for the semi-automatic honing of con-rods, but they are suitable for all sorts of similar shaped bores Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on lorry, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products USASOLDModel:
EC-3500-CEMCapacity:
1.5 -100.00mm diameter x170mm strokeDescription:
According to Sunnen's brochure, the EC-3500 machine takes power honing to a higher level of efficiency and performance, and they’re not wrong. Very much more powerful than the ‘traditional’ MBB1600/1800 series machines, the EC family are able to significantly reduce cycle times yet can still hold bore tolerance to within a few microns. This used honing machine is ideal for the production honing of large batches of componentsPrice:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
EC-3500-CEMCapacity:
1.5 -100.00mm diameter x170mm strokeDescription:
According to Sunnen's brochure, the EC-3500 machine takes power honing to a higher level of efficiency and performance, and they’re not wrong. Very much more powerful than the ‘traditional’ MBB1600/1800 series machines, the EC family are able to significantly reduce cycle times yet can still hold bore tolerance to within a few microns. This used honing machine is ideal for the production honing of large batches of componentsPrice:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
CH-100-CA Line HoneCapacity:
Main Bearing bores from 46.00 -178.00mm diameterDescription:
The Line Hone was designed to hone the bores of engine main bearings, and is the best machine in its class for this type of work. It is also very useful as a jobbing machine for miscellaneous parts up to 1m longPrice:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Importantly the machine comes complete with two very valuable mandrels, a 10RY-2400G & a 10RY-2700G, which between them cover all bore diameters between 61 -77mm. Email:
enquire about this machine
CH-100-CA Line HoneCapacity:
Main Bearing bores from 46.00 -178.00mm diameterDescription:
The Line Hone was designed to hone the bores of engine main bearings, and is the best machine in its class for this type of work. It is also very useful as a jobbing machine for miscellaneous parts up to 1m longPrice:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Importantly the machine comes complete with two very valuable mandrels, a 10RY-2400G & a 10RY-2700G, which between them cover all bore diameters between 61 -77mm. Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
CK10 Cylinder KingCapacity:
19 -203mm diameter, x250mm workpieceDescription:
The CK10 is original 'Daddy' of all Cylinder Kings, and is the easiest to set up and run of the whole family. This machine is in excellent working order and is used on a regular basis in our contract honing shop Price:
SOLDTerms:
Pro-forma, (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable. Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
CK10 Cylinder KingCapacity:
19 -203mm diameter, x250mm workpieceDescription:
The CK10 is original 'Daddy' of all Cylinder Kings, and is the easiest to set up and run of the whole family. This machine is in excellent working order and is used on a regular basis in our contract honing shop Price:
SOLDTerms:
Pro-forma, (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable. Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
CV-616 Cylinder KingCapacity:
19 -203mm diameter, up to 300mm length Description:
The Sunnen Cylinder King is a simple machine to understand. A new operator can learn to run it in only a few hours, as set up is both quick and easy. Stock removal is pre-set, the machine automatically shuts off when the feed cycle is complete. Price:
SOLDTerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
Used tooling available at additional cost. Training offered from £350/day. Email:
enquire about this machine
CV-616 Cylinder KingCapacity:
19 -203mm diameter, up to 300mm length Description:
The Sunnen Cylinder King is a simple machine to understand. A new operator can learn to run it in only a few hours, as set up is both quick and easy. Stock removal is pre-set, the machine automatically shuts off when the feed cycle is complete. Price:
SOLDTerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
Used tooling available at additional cost. Training offered from £350/day. Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
CV-616Capacity:
19 -203mm diameter, up to 300mm lengthDescription:
The Sunnen Cylinder King is a simple machine to understand. A new operator can learn to run it in only a few hours, as set up is both quick and easy. Stock removal is pre-set, the machine automatically shuts off when the feed cycle is complete. This example has previously been owned by a Formula One racing team and is in excellent condition throughoutPrice:
SOLDTerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Negotiable. Training offered from £350/day.Email:
enquire about this machine
CV-616Capacity:
19 -203mm diameter, up to 300mm lengthDescription:
The Sunnen Cylinder King is a simple machine to understand. A new operator can learn to run it in only a few hours, as set up is both quick and easy. Stock removal is pre-set, the machine automatically shuts off when the feed cycle is complete. This example has previously been owned by a Formula One racing team and is in excellent condition throughoutPrice:
SOLDTerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Negotiable. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA)SOLDModel:
CV616-H Cylinder KingCapacity:
19 -203mm diameter x250mm longDescription:
The CV616-H is the last of the manual Cylinder Kings and comes equipped with the desirable LCD readout that gives an indication of bore ovality and taper. We imported this machine from the USA in 2007 and have used it in our contract honing devision throughout 2008. It is in excellent condition and is ready to give years of reliable service.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable Training offered from £350/day.Email:
enquire about this machine
CV616-H Cylinder KingCapacity:
19 -203mm diameter x250mm longDescription:
The CV616-H is the last of the manual Cylinder Kings and comes equipped with the desirable LCD readout that gives an indication of bore ovality and taper. We imported this machine from the USA in 2007 and have used it in our contract honing devision throughout 2008. It is in excellent condition and is ready to give years of reliable service.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works CheltenhamTooling:
Negotiable Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnen Products (USA) SOLDModel:
CK 21 CGCapacity:
19 -203mm diameter, workpieces up to 450mm long Description:
The CK 21 is the third generation of Sunnen's popular Cylinder King range of vertical honing machines. They have programmable controllers which allow the operator to adjust settings directly from his control panel, and, whilst in-cycle, display a real time graphic of the actual bore size, indicating stock removal, taper and ovality. Always popular, this is the fourth CK-21 we've had, it's in excellent order and is ready to give years of reliable and repeatable service. Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
New and used tooling is available at additional costs. Training offered from £350/day.Email:
enquire about this machine
CK 21 CGCapacity:
19 -203mm diameter, workpieces up to 450mm long Description:
The CK 21 is the third generation of Sunnen's popular Cylinder King range of vertical honing machines. They have programmable controllers which allow the operator to adjust settings directly from his control panel, and, whilst in-cycle, display a real time graphic of the actual bore size, indicating stock removal, taper and ovality. Always popular, this is the fourth CK-21 we've had, it's in excellent order and is ready to give years of reliable and repeatable service. Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
New and used tooling is available at additional costs. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionSunnenSOLDModel:
SV-210Capacity:
19 -200mm diameter up to 700mm longDescription:
The SV-210 machine combines power, precision and latest technology and results in a modern machine capable of quick cycle times and high levels of repeatability. This example is in pristine condition having less than 100-hours on its run meter, and is ideal for volume production.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Negotiable. Tooling & consumables available at cost. Training offered from £350/dayEmail:
enquire about this machine
SV-210Capacity:
19 -200mm diameter up to 700mm longDescription:
The SV-210 machine combines power, precision and latest technology and results in a modern machine capable of quick cycle times and high levels of repeatability. This example is in pristine condition having less than 100-hours on its run meter, and is ideal for volume production.Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
Negotiable. Tooling & consumables available at cost. Training offered from £350/dayEmail:
enquire about this machine