- Home
- Introduction
- Contract Honing
- Hand Honing
- Tube Polishing
- Tube Honing
- Products
- Used Machines
- Capacity List
- Contact Us
Apperley Honing Limited
Malmesbury Road
Kingsditch Trading Estate
Cheltenham GL51 9PL
United Kingdom
Tel: +44 (0) 1242 525868
Fax: +44 (0) 1242 224738
sales@apperleyhoning.co.uk
Used Honing Machines
Apperley Honing hold what is probably the largest stock of used honing machines in Europe.
Stock includes manual and automatic stroke hand-honing machines, Beamstrokers, Cylinder Kings, Horizontal & Vertical tube honers, from Delapena, Sunnen and Barnes. Machines can be demonstrated under power in our Cheltenham (UK) workshops, and can be supplied complete with tooling, fixtures, gauges, consumables and full operator training.
Click image for a larger versionZanrossoSOLDModel:
CH-200Capacity:
25 -200mm diameter, up to 350mm longDescription:
The Italian built Zanrosso CH-200 is designed to hone automotive cylinder blocks, but is equally capable of honing any bore 25 to 200mm diameter up to 350mm long. It use tooling that is similar to Delapena's Midget, Minor, Junior & Standard range, and Sunnen's range of Portable Hones. This version is cosmetically tatty (it has been hand painted)but otherwize is in good working orderPrice:
SOLDTerms:
Pro-forma (+VAT for UK sales). FCA =loaded on your transport, ex-works Chaltenham)Tooling:
New and used tooling is available at additional costEmail:
enquire about this machine
CH-200Capacity:
25 -200mm diameter, up to 350mm longDescription:
The Italian built Zanrosso CH-200 is designed to hone automotive cylinder blocks, but is equally capable of honing any bore 25 to 200mm diameter up to 350mm long. It use tooling that is similar to Delapena's Midget, Minor, Junior & Standard range, and Sunnen's range of Portable Hones. This version is cosmetically tatty (it has been hand painted)but otherwize is in good working orderPrice:
SOLDTerms:
Pro-forma (+VAT for UK sales). FCA =loaded on your transport, ex-works Chaltenham)Tooling:
New and used tooling is available at additional costEmail:
enquire about this machine
Click image for a larger versionCDM Rovella S.p.A. ItalySOLDModel:
PL20R Diatomaceous Earth Pre-coat FilterCapacity:
60 litres/minute filtered down to 5-micron maximum particle size Description:
In our opinion CDM Rovella manufacture the very best diatomaceous earth pre-coat filters in the whole of the world. Our sister company Apperley Honing swears by them, having had one installed since the early 1990's. Suitable for large machine shops running several hones, this pre-coat filter is in good running order and is ready to keep your honing oil 'transparently' clean for many years to come.Price:
SOLDTerms:
Pro-forma. FCA (loaded on your transport, ex-works Cheltenham)Tooling:
Not applicableEmail:
enquire about this machine
PL20R Diatomaceous Earth Pre-coat FilterCapacity:
60 litres/minute filtered down to 5-micron maximum particle size Description:
In our opinion CDM Rovella manufacture the very best diatomaceous earth pre-coat filters in the whole of the world. Our sister company Apperley Honing swears by them, having had one installed since the early 1990's. Suitable for large machine shops running several hones, this pre-coat filter is in good running order and is ready to keep your honing oil 'transparently' clean for many years to come.Price:
SOLDTerms:
Pro-forma. FCA (loaded on your transport, ex-works Cheltenham)Tooling:
Not applicableEmail:
enquire about this machine
Click image for a larger versionBarnes International (USA)SOLDModel:
224Capacity:
25 -150mm diameter x600mm longDescription:
Basic vertical used honing machine fitted with hydraulic stone expansion. Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Let us know what you need Training available from £350/dayEmail:
enquire about this machine
224Capacity:
25 -150mm diameter x600mm longDescription:
Basic vertical used honing machine fitted with hydraulic stone expansion. Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Let us know what you need Training available from £350/dayEmail:
enquire about this machine
Click image for a larger versionBarnes International (USA)SOLDModel:
Number 3Capacity:
Tubes 10 -300mm diameter, up to 3750mm longDescription:
This machine is virtually new, having been safely tucked up for many years in long term military store in the USA. We found two machines and brought them both over to the UK in 2008 and now offer them for re-sale. Ideally suited for tubes between 25 -150mm diameter, they can be adapted to hone down to 10mm and up to 300mm diameter. Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
New and used tooling available depending on application Training from £350/dayEmail:
enquire about this machine
Number 3Capacity:
Tubes 10 -300mm diameter, up to 3750mm longDescription:
This machine is virtually new, having been safely tucked up for many years in long term military store in the USA. We found two machines and brought them both over to the UK in 2008 and now offer them for re-sale. Ideally suited for tubes between 25 -150mm diameter, they can be adapted to hone down to 10mm and up to 300mm diameter. Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =Loaded on transport, ex-works Cheltenham Tooling:
New and used tooling available depending on application Training from £350/dayEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
Bench HoneCapacity:
1.14 -80.00mm Description:
We've acquired the last four Bench-Hones ever made, direct from Delapena, after they discontinued the model in 2008. These are all BRAND NEW single-phase machines and are still in their factory wrapping. Complete with oil pump and simple drip tray, the machines are an ideal introductory hone for the first time user. Price:
ALL 4 SOLD, SORRY!Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Bench HoneCapacity:
1.14 -80.00mm Description:
We've acquired the last four Bench-Hones ever made, direct from Delapena, after they discontinued the model in 2008. These are all BRAND NEW single-phase machines and are still in their factory wrapping. Complete with oil pump and simple drip tray, the machines are an ideal introductory hone for the first time user. Price:
ALL 4 SOLD, SORRY!Terms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
HHM 1ACapacity:
1.5 -80.0mm diameterDescription:
The HHM1A is a basic hand-honing machine, and was the forerunner to Delapena's popular 'Speedhone'. It can do just about everything the more expensive models can, and is the ideal machine for the light user. Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
HHM 1ACapacity:
1.5 -80.0mm diameterDescription:
The HHM1A is a basic hand-honing machine, and was the forerunner to Delapena's popular 'Speedhone'. It can do just about everything the more expensive models can, and is the ideal machine for the light user. Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered from £350/day.Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
311Capacity:
1.14 -79.37mm diameterDescription:
The Delapena 311 is basically a Bench-hone mounted on a factory made stand and is ideal for low volume applications and the occassional userTerms:
Pro-forms FCA (ex-works Cheltenham +VAT)Tooling:
New and used tooling is available at additional costEmail:
enquire about this machine
311Capacity:
1.14 -79.37mm diameterDescription:
The Delapena 311 is basically a Bench-hone mounted on a factory made stand and is ideal for low volume applications and the occassional userTerms:
Pro-forms FCA (ex-works Cheltenham +VAT)Tooling:
New and used tooling is available at additional costEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
SpeedhoneCapacity:
1.14mm to 79.37mm diameter Description:
A Delapena Speedhone in excellent condition, suitable for honing small & medium sized batches of components Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
New and used tooling & consumables available Email:
enquire about this machine
SpeedhoneCapacity:
1.14mm to 79.37mm diameter Description:
A Delapena Speedhone in excellent condition, suitable for honing small & medium sized batches of components Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
New and used tooling & consumables available Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
Speedhone EMCapacity:
1.50 -80.00mmDescription:
We have just aquired a Speedhone EM in excellent condition. The EM model was introduced in 1992 and it replaced the original Speedhone along with it's mechanical drive. The modern electronic drive of the EM allows for an infinitely variable spindle speed range. Much better suited to small bore work than the original, the EM is perfect for jobbing shops and toolroom work.Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Speedhone EMCapacity:
1.50 -80.00mmDescription:
We have just aquired a Speedhone EM in excellent condition. The EM model was introduced in 1992 and it replaced the original Speedhone along with it's mechanical drive. The modern electronic drive of the EM allows for an infinitely variable spindle speed range. Much better suited to small bore work than the original, the EM is perfect for jobbing shops and toolroom work.Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
SmarthoneCapacity:
1.50 -80.0mm diameterDescription:
The Smarthone is a Speedhone EA fitted with a vibratory pick and place fixture, autosizing control and a terrible paint job that allows the machine to run automatically, unattended for hour after hour. Designed for volume manufacture, the preowned honing machine will need to be re-jigged and then set for a new job, and we can help and advise on this if requiredPrice:
SOLDTerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
TBAEmail:
enquire about this machine
SmarthoneCapacity:
1.50 -80.0mm diameterDescription:
The Smarthone is a Speedhone EA fitted with a vibratory pick and place fixture, autosizing control and a terrible paint job that allows the machine to run automatically, unattended for hour after hour. Designed for volume manufacture, the preowned honing machine will need to be re-jigged and then set for a new job, and we can help and advise on this if requiredPrice:
SOLDTerms:
Pro-forma,(+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
TBAEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
AutospeedhoneCapacity:
None Left!!Description:
A very tired Autospeedhone that we took in part exchange and is now at the end of its useful life. Suitable for stripping for spares.Price:
SOLDTerms:
Sold as seen with no guarantee. Pro-forma ex-works (+VAT for UK sales) Tooling:
None includedEmail:
enquire about this machine
AutospeedhoneCapacity:
None Left!!Description:
A very tired Autospeedhone that we took in part exchange and is now at the end of its useful life. Suitable for stripping for spares.Price:
SOLDTerms:
Sold as seen with no guarantee. Pro-forma ex-works (+VAT for UK sales) Tooling:
None includedEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
AutospeedhoneCapacity:
1.14 -79.37mm diameterDescription:
One of two identical Delapena Autospeedhone machines suitable for honing small and medium batches of componentsPrice:
SOLDTerms:
Pro-forma FCATooling:
New and used tooling available at additional costEmail:
enquire about this machine
AutospeedhoneCapacity:
1.14 -79.37mm diameterDescription:
One of two identical Delapena Autospeedhone machines suitable for honing small and medium batches of componentsPrice:
SOLDTerms:
Pro-forma FCATooling:
New and used tooling available at additional costEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
Speedhone EACapacity:
1.14 -80.00mm diameterDescription:
The Speedhone EA replaced the ever popular Autospeedhone in the 1990's. Fitted with stepless electronic drives the EA has a much lighter touch than the older machine and, whilst retaining the all of the power EA's they are much kinder on the abrasives which reduces consumable cost. Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered at £350/dayEmail:
enquire about this machine
Speedhone EACapacity:
1.14 -80.00mm diameterDescription:
The Speedhone EA replaced the ever popular Autospeedhone in the 1990's. Fitted with stepless electronic drives the EA has a much lighter touch than the older machine and, whilst retaining the all of the power EA's they are much kinder on the abrasives which reduces consumable cost. Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works CheltenhamTooling:
Brand new tooling & consumables available at cost. Training offered at £350/dayEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
Speedhone EACapacity:
1.14 -80.0mm diameter x350mm long strokeDescription:
The Speedhone EA replaced the popular Autospeedhone S in 1992 and is an efficient, productive and quick to set up horizontal honing machine with electronic spindle control. We have acquired 4 of these used honing machines direct from the factory, they have spent their entire life to date in Delapena's contract honing department and are offered with a factory backed 6-months parts warranty. Price:
All four SOLD, sorryTerms:
6-months parts warranty Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Speedhone EACapacity:
1.14 -80.0mm diameter x350mm long strokeDescription:
The Speedhone EA replaced the popular Autospeedhone S in 1992 and is an efficient, productive and quick to set up horizontal honing machine with electronic spindle control. We have acquired 4 of these used honing machines direct from the factory, they have spent their entire life to date in Delapena's contract honing department and are offered with a factory backed 6-months parts warranty. Price:
All four SOLD, sorryTerms:
6-months parts warranty Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment SOLDModel:
BeamstrokerCapacity:
25.4 -368.0mm diameterDescription:
Delapena's hugely popular 'Nodding Donkey' returns to our stock list after a bit of a break, having sold the last one back in February. We've got the clean machine photographed and another on its way too. The Beamstroker is hughly adapatable, and is suitable for a large variety of componentsPrice:
SOLDTerms:
Pro-forma FCA (loaded on your transport ex-works Cheltenham) Tooling:
New and used tooling is availalbe at extra cost. Email:
enquire about this machine
BeamstrokerCapacity:
25.4 -368.0mm diameterDescription:
Delapena's hugely popular 'Nodding Donkey' returns to our stock list after a bit of a break, having sold the last one back in February. We've got the clean machine photographed and another on its way too. The Beamstroker is hughly adapatable, and is suitable for a large variety of componentsPrice:
SOLDTerms:
Pro-forma FCA (loaded on your transport ex-works Cheltenham) Tooling:
New and used tooling is availalbe at extra cost. Email:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
Auto-strokerCapacity:
25.4 -368.0mm diameter Description:
Delapena's popular 'nodding donkey' honing machine is capable of honing parts from 1" to 14.5" diameter and the Auto-stroker model benefits from pneumatic power stroking for faster stock removal. It uses inexpensive tooling to achieve it's great size range, and is just as happy removing a couple of thou of corrosion from a single component as it is producing production batches. Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/dayEmail:
enquire about this machine
Auto-strokerCapacity:
25.4 -368.0mm diameter Description:
Delapena's popular 'nodding donkey' honing machine is capable of honing parts from 1" to 14.5" diameter and the Auto-stroker model benefits from pneumatic power stroking for faster stock removal. It uses inexpensive tooling to achieve it's great size range, and is just as happy removing a couple of thou of corrosion from a single component as it is producing production batches. Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/dayEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
PowerhoneCapacity:
35.4 -368.00mm diameter, x812mm max workpiece length Description:
The Powerhone is the replacement for the popular Autostroker & V-450 hones, and it combines hydraulic stroking power with precise control. The machine has short stroke and dwell facilities along with a self-contained honing oil tank and pump unit. The Powerhone is one of Delapena's best selling models, but is very seldom found on the second-hand market. This is only the third used Powerhone machine we've had, and is sure to sell soon.Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
PowerhoneCapacity:
35.4 -368.00mm diameter, x812mm max workpiece length Description:
The Powerhone is the replacement for the popular Autostroker & V-450 hones, and it combines hydraulic stroking power with precise control. The machine has short stroke and dwell facilities along with a self-contained honing oil tank and pump unit. The Powerhone is one of Delapena's best selling models, but is very seldom found on the second-hand market. This is only the third used Powerhone machine we've had, and is sure to sell soon.Price:
SOLDTerms:
Pro-Forma, (+VAT for UK sales). FCA = loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Click image for a larger versionDelapena Honing EquimpentSOLDModel:
V-450Capacity:
25 -350mm diameter, x350mm strokeDescription:
The V-450 hone sits comfortably between the Autostroker and the current Powerhone models. They are ideal for honing cylinder blocks, liners, hydraulic parts etc and can accomodate all Delapena mandrels, along with the popular and ecomonical Midget, Minor, Junior and Standard heads.Price:
SOLDTerms:
Pro-forma FCA (loaded on your transport, ex-works Cheltenham)Tooling:
New and used tooling is available at additional costEmail:
enquire about this machine
V-450Capacity:
25 -350mm diameter, x350mm strokeDescription:
The V-450 hone sits comfortably between the Autostroker and the current Powerhone models. They are ideal for honing cylinder blocks, liners, hydraulic parts etc and can accomodate all Delapena mandrels, along with the popular and ecomonical Midget, Minor, Junior and Standard heads.Price:
SOLDTerms:
Pro-forma FCA (loaded on your transport, ex-works Cheltenham)Tooling:
New and used tooling is available at additional costEmail:
enquire about this machine
Click image for a larger versionDelapena Honing Equipment (UK)SOLDModel:
VHM/3Capacity:
25.0 -150.0mm diameter, x760mm stroke length Description:
The VHM/3 is a powerful semi-automatic machine fitted with rugged hydraulic stroking. They are ideal for honing cylinder blocks, liners, hydraulic cylinders and the like. They use Delapena’s popular friction feed expansion system and low cost tooling Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
VHM/3Capacity:
25.0 -150.0mm diameter, x760mm stroke length Description:
The VHM/3 is a powerful semi-automatic machine fitted with rugged hydraulic stroking. They are ideal for honing cylinder blocks, liners, hydraulic cylinders and the like. They use Delapena’s popular friction feed expansion system and low cost tooling Price:
SOLDTerms:
Pro-forma (+VAT for UK sales) FCA =loaded on transport, ex-works Cheltenham Tooling:
Brand new tooling & consumables available at cost. Training offered from £350/day. Email:
enquire about this machine
Click image for a larger versionDelapena Honing EquipmentSOLDModel:
VHM/18-01Capacity:
25.0 -150mm diameter x460mm longDescription:
The VHM18 is an old school vertical hone suitable for honing automotive cylinder liners and compressor bodies. This machine is in perfect working order and for the price knocks spots of Sunnen's Cylinder King.Price:
SOLDTerms:
Pro-Forma FCA (loaded on your transport ex-works Cheltenham) Tooling:
New and used tooling is available at extra costEmail:
enquire about this machine
VHM/18-01Capacity:
25.0 -150mm diameter x460mm longDescription:
The VHM18 is an old school vertical hone suitable for honing automotive cylinder liners and compressor bodies. This machine is in perfect working order and for the price knocks spots of Sunnen's Cylinder King.Price:
SOLDTerms:
Pro-Forma FCA (loaded on your transport ex-works Cheltenham) Tooling:
New and used tooling is available at extra costEmail:
enquire about this machine